Home     Discussion Forum     Technical Info     Our Service     Photo Gallery     Installation Process     Contact Us     Privacy Statement     Links     Tile Setters Directory




~ Rob Z Remodeling ~
Loudoun County, Virginia, USA.

Robert Zschoche Remodeling, LLC
VA Class A 2705 87502
MD MHIC 85036

Here Tony is re-attaching the cover to the hydronic baseboard heat fixture. Since the new floor is slightly higher than the old floor, we had to cut the sheet metal off the bottom of the ends and corner pieces.
Todd Muse of Victory Electric is installing recessed lighting in the room where our cabinets were stored. Now that all of our stuff is out of his way, he can get the additional electrical work done in the house.
Here is the sink base cabinet. We have roughed in the water lines, with a "T" on the hot side for the dishwasher. Strips of wood have been added to the upper portion of the cabinet to support the undermount sink. The drain has been extended into the cabinet, and is ready to be hooked up.
The range hood is installed, wired, and hooked up to the ductwork. The manufacturer sent the wrong brackets, so we can't install the chimney until the correct brackets arrive via UPS. This is a Faber Perla stainless steel range hood with matching backsplash.

We used a table saw, surface planer and jointer to make oak thresholds for the three doorways into the kitchen. The red oak will be stained to match the recently refinished oak floors in the rest of the house.

My ancient Craftsman jointer fell apart right when we were getting ready to use it, so I had to run to Lowe's and buy a new Delta jointer.

We installed the thresholds with construction adhesive and 8 penny finish nails.

Page 1 | Page 2 | Page 3 | Page 4 | Page 5 | Page 6 | Page 7 | Page 8 | Page 9

Back to Home Page